Rakesh Trade Centre

• Continuous use temperature of 120 ℃
• Excellent mechanical properties.
• Excellent chemical resistance (organic solvent, oil, alkali) and corrosion resistance.
• Excellent durabilities such as abrasion resistance, impact resistance, and load-carrying property.

We are best supplier for the PEI (Polyetherimide) Rod in the Market.These have a high mechanical strength in connection with a good chemical and heat resistance, dimensional stability and creep resistance. Also, its unique torque strength permits the economical substitution of machined fabricated small parts from steel.

Properties

·         Very high strength and rigidity

·         High creep resistance

·         High torque strength and hardness

·         High weather resistance

·         High radiation resistance against -rays

·         Self-extinguishing

·         Limited resistance to stress cracks

Applications:-

·         Aircraft & Airospace Technology

·         Automotive Industries

·         Electronics

·         Medical Technology

·         Food Engineering & Processing

Generic Name:
POM / Acetal / Delrin/formaldehyde
Material Description:
Semi crystalline with High dimensional stability 

Properties:

• Good UV resistance
• High Dimensional accuracy
• low moisture absorption
• Good sliding behaviour
• Good electric and dielectric properties

Chemical Resistance:

• Resistant to Hydrocarbons, alkalis, greases, oils, fuels, ethers, esters, ketones, water up to 100 deg C.
• Not Resistant to halogens, acids, oxidizing agents, nitrogen oxides

Applications :
 

• Mechanical Engineering, Automotive Industry, Textile Industry

• Food Processing Industry - Cams, Sprockets, guides, star wheels, bushes, holders, Gears, wear plates, guide rollers, feed worms
• Machine building - mainfolds, bushes, Gears,Snap on connections, flangers
• Medical & Pharma - Surgical Handles, Sterlisation boxes, trays, billets seperators, pick and place parts

Sizes

Calendered Sheets : 1 mm to 10 mm thickness

Size                         : 1000 x 2000 mm 

Standard Sheets     : 10 mm to 150 mm

Size                         : 3000 x 620 mm & 1000 x 2000 mm

Rods                       : Ø 5 mm to Ø 400 mm

                                : L 1000 mm / L 3000 mm

Colours : White  , black , Blue

We can supply PLASTIC GEARS any desired grade of material in all module and DP Sizes. Any type of gear Spur/Helical/Bevel/Double helical/Worm Gear etc. can be provided in Nylon/plastic.

Work is undertaken on a complete supply basis as well as on gear cutting only basis

• Material benefits:Polypropylene's high impact resistance, good chemical resistance, and low moisture absorption make it ideal for applications where strength and stability are crucial in a demanding environment. 
• Applications in orthotics:
  • Lower limb braces (ankles, knees) 
  • Upper limb braces (elbows, wrists) 
  • Custom prosthetic sockets 
• Processing advantages:Polypropylene can be easily thermoformed, meaning it can be heated and molded into complex shapes to match the contours of a patient's body. 

• _{Temperature: -30°C up to +95°C.}
• _{Good sliding and wear properties.}
• _{High strength and resistant to many oils, greases, diesel, petrol and cleaning fluids.}
• _{Electrically insulating, weldable and bondable.}

• ^{Strength: HDPE has a high strength-to-density ratio, which means it can carry a lot of weight for its size.} 
• ^{Heat resistance: HDPE can withstand high temperatures without becoming deformed.} 
• ^{Chemical resistance: HDPE is resistant to many chemicals.} 
• ^{Impact resistance: HDPE is resistant to scratches and impacts.} 
• ^{Corrosion resistance: HDPE is resistant to corrosion.} 

• ^{Storage containersHDPE is used to make milk jugs, bleach bottles, and other liquid storage containers.} 
• ^{PipesHDPE is used to make pipes.} 
• ^{Marine applicationsHDPE is used in marine applications because of its resistance to abrasion and chemicals.} 
• ^{Industrial applicationsHDPE is used in industrial applications because of its strength, durability, and low coefficient of friction.} 

PA6+Mos2 rods are made of a cast nylon material which using the filler of MoS2 results in an improvement in the degree of crystallinity, bringing a higher degree of strength to the cast polyamide, still without any noticeable degradation of hardness. Increasing the crystallinity of this PA 6, the Mos2 filled Polyamide also results in better surface hardness and improved abrasion properties compared to standard cast PA 6.

• High rigidity
• High degree of hardness
• Good dimensional stability
• Lower impact strength
• Good fatigue strength
• Good mechanical damping properties
• Good sliding friction properties
• Good abrasion resistance

• _{Lubrication: Oilon is self-lubricating and has a lower coefficient of friction than unfilled nylon} 
• _{Wear resistance: Oilon has better wear resistance than unfilled nylon and bronze} 
• _{Moisture resistance: Oilon has reduced moisture} 
• _{Load-bearing performance: Oilon has increased load-bearing performance compared to unfilled nylon} 

• _{Oilon is used in chain guides, bearings, wear pads, cams, conveyor parts, gears, and can mandrels.}
• 
  
• Manufacturing
  • Oilon is made by casting nylon with an oil-based lubricant 
  • The lubricant is distributed throughout the profile and doesn't drain, spin, leech, or dry out 
  
  

• High Wear Resistance:UHMWPE has exceptional resistance to abrasion and wear, making it ideal for applications where parts are subjected to friction and sliding. 
• Low Friction:The material has a low coefficient of friction and self-lubricating properties, reducing energy consumption and wear in moving parts. 
• High Impact Strength:UHMWPE exhibits high impact resistance, making it suitable for applications where parts are subjected to shocks and impacts. 
• Chemical Resistance:UHMWPE is resistant to many chemicals, including acids, alkalis, and organic solvents, making it suitable for use in harsh environments. 
• Versatility:UHMWPE profiles can be extruded in various shapes and sizes to suit different applications, including chain guides, wear strips, and conveyor components. 
• Food Contact Safety:UHMWPE can meet FDA requirements for food contact, making it suitable for use in food processing and packaging equipment. 
• Sound Dampening:UHMWPE has good sound dampening properties, making it suitable for applications where noise reduction is important. 

• Conveyor Systems:UHMWPE profiles are used as wear strips, chain guides, and other components in conveyor systems to reduce friction, wear, and energy consumption. 
• Food Processing and Packaging:UHMWPE profiles are used in food processing and packaging equipment due to their resistance to chemicals and their ability to meet FDA requirements. 
• Material Handling:UHMWPE profiles are used in material handling equipment to reduce friction, wear, and noise. 
• Industrial Machinery:UHMWPE profiles are used in industrial machinery as wear surfaces, bearings, and other components. 
• Other Applications:UHMWPE profiles are also used in applications such as dock fenders, snow plows, and medical devices. 

<sub>High Density Poly Ethylene (HDPE) is a thermoplastic polymer made from petroleum. t is used to manufacture numerous items, including food and beverage containers, cleaning product bottles, pipes, cutting boards, and some shoe parts.

Available Colour:- White & Black

Standard Sizes in 1 Mtr Length, also customized product, as per drawing requested.</sub>